Tutorial: Moana Heart of Te’Fiti Pendant

Tutorial: Moana Heart of Te’Fiti Pendant

This weekend’s tutorial is a guide on making Disney’s Moana Heart of Te’Fiti pendant. The pendant–technically a piece of rock–is iconic to the movie, and is central to the plot.

When I made this tutorial, Moana was only recently released, and high resolution photos of the stone weren’t available yet, thus the end product isn’t as accurate as I’d like. Someday I may revisit this and make a more accurate tutorial!


 photo Moana-86.jpgReference from the Moana movie.
Materials:

  • Polymer clay in greens, pearl white, and translucent.
  • Scrap polymer clay
  • Mica powder
  • Microfine Glitter
  • Casting Epoxy (I use Castin’ Craft) and colorant (I use oil paints.)

 photo tefiti_1.jpgFirstly, I made a Skinner Blend using the pearl aqua green clay (my own blend of colors) and pearl white clay. Mica powder has been conditioned into each color to give it more shimmer, and the look of a precious rock. I didn’t want the rock to just be one slab of color, so I settled on making a soft gradient for it.

 photo tefiti_2.jpgThe Skinner Blend is a polymer clay technique for making gradients, and click here for a wonderful tutorial on it.

 photo tefiti_3.jpgI made the rock shape in scrap polymer clay, and go over it with the gradient. I usually use scrap clay to fill in insides of shapes or molds, so that nothing goes to waste.

 photo tefiti_4.jpgSmooth the gradient sheet over with a silicone tool. Now it looks more like a “rock”. Notice the rich shimmer thanks to the mica powder!

 photo tefiti_5.jpgI haven’t been able to take enough photos of this process, but next thing I do is roll a very thin sheet of translucent clay mixed with fine glitter, and then cut out shapes from it according to the shapes of the reference. I also cut out a shape from the rest of the gradient clay I made earlier, this time the darker part of it. I then put the cutouts over onto the base gradient rock, smoothing and blending it into it.

I then baked the rock in my oven, and then sand and buff it with a rotary tool. I meant for the stone to become a pendant, so I put in a screw pin into it.

 photo tefiti_6.jpgI wanted to give the rock it’s “glow”, so I mixed some yellow green oil paint into casting epoxy, then coating the base rock with it. I let it cure for a day.

 photo tefiti_7.jpgNotice how there’s an illusion of the rock “glowing” when it’s hit by light? It looks really pretty! *w*

If you’re aiming for a more accurate stone, I’d suggest casting the entire thing in Casting Epoxy for that transparent look, and perhaps mixing in some glow in the dark powder!

I hope this tutorial still helped you out, and I may redo this stone when time permits!

xoxo Xarin

 

Tutorial: Miraculous Ladybug Earrings

Tutorial: Miraculous Ladybug Earrings

This week’s blog update is a quick tutorial on one of our most sought-after products: Marinette’s earrings from the series “Miraculous Ladybug”.

The iconic earrings feature a red dome with five dots on them, mounted on a silver earring base. For this tutorial I’ll be using polymer clay and casting resin, to make a semi-transparent dome with dots encapsulated inside, to be sure that they don’t fade.

MATERIALS:

  • Polymer clay, in black.
  • Silicone putty, or any mold making material.
  • Casting Epoxy (I use Castin’ Craft)
  • Red colorant (I use red food color)
  • Silver earring base settings (I used 12mm ones)

 photo mlear-1.jpg
To start, I make molds from Silicone Putty with a base that I measured fits the earring base exactly. If you can’t make your own mold, or have no mold making material, be creative and use hollow domes from watercolor pans, as long as they fit your earring base! I made two molds here (other one not shown) to make a pair of earrings.

 photo mlear-2.jpg
I cut out five dots of polymer clay in black, and then position them into the mold, using liquid clay if needed to hold their place. Do the same for the other earring mold, and then bake in your polymer clay oven following your clay’s instructions.
The reason I use polymer clay for these earrings is because most people draw the dots on or use a printed base behind the dome, which will fade over time. Those are surely cheaper, less labor intensive ways to go about it, but if you plan to keep your earrings for years or want to wear them daily, and not just in cosplay, it’s worth it to go the extra trouble.

 photo mlear-3.jpg
When the dots are baked, I carefully pour a mix of tinted casting epoxy into the molds. Let it cure for at least 24 hours. Don’t know how to use casting epoxy? You can check my tutorial on it here.

 photo mlear-4.jpg
After the domes are cured, I pop them out of the mold. After that I may or may not need to put an extra coat of glaze or resin on them to make them shinier… and then finally, glue them to the earring base! And we’re all done!
It looks straightforward and simple, but is actually a time-consuming progress, however the results are quite cute!

 photo il_570xN.1138640241_swqk.jpg

Remember that if you aren’t confident in your skills or don’t have access to the materials used here, you can always put in an order for these earrings at my Etsy store. Support from my store guarantees that I can keep crafting, and providing free craft and cosplay tutorials on this blog!
Happy crafting!

Yuri Plisetsky Cosplay Construction Notes

Yuri Plisetsky Cosplay Construction Notes

Seeing Yuri!!! On Ice last year was certainly iconic for me. I personally invested in seeing all of it for one reason: Yuri Plisetsky. The moment his eyes glittered over from seeing the tiger shirt in episode 2 (or 3) resonates with me when I see cute stuff, haha! From then on I decided to give cosplaying him a go, in his edgy streetwear.

His streetwear version can be broken down into:
– Tiger Shirt
– Leopard Print sports jacket
– Zip up Black Hoodie
– Black pants
– Studded bag

HOODIE AND PANTS:

The pants and hoodie is something you’re likely to already have in your own closet (…or in my case… my brother’s closet LOL) which makes the major part of this cosplay clearly the tiger shirt and the leopard jacket. Most of my sewing / construction is on the jacket.

SPORTS JACKET:

 photo yurio1.jpg
For the leopard print, I scoured the thrift stores (ukay-ukay, Goodwill) for any garment that had a leopard print in a good fabric.

Things to consider when buying a base piece to upcycle are firstly the quality of the print–don’t go for a garment with a blurry print–and then the quality of the fabric. Other things to consider? The size/amount of fabric, make sure there’s enough in the base garment to make the new garment you’re making.


 photo yurio8.jpg
I scored a winter faux-fur vest that had off-white fur and was fully lined with leopard spot faux fur inside. For P220 (4-5USD). Later I found out a yardage of this leopard faux fur is P460 (10-11USD) … so by upcycling you save up a lot! Also I’ll be using the white fur for another cosplay, haha!

For the new jacket itself, I took my black fabric scraps (I used peach twill) to construct the upper part of the jacket. I used the pattern for an ordinary bodice, only sewing in shoulder darts. (You can even get by without doing that.) No waist darts since this is meant to emulate ready-to-wear menswear.

 photo yurio2.jpg
Attached the black jacket parts to the leopard. I kinda did an epic fail and cut the leopard print before looking at the reference… it was supposed to attach diagonally to the black parts, but I cut it at a straight… SO MORAL LESSON! LOOK AT THE REFERENCE BEFORE CUTTING! I just decided to roll with it though and crossed my fingers that no one will notice

I didn’t do it here since I realized it too late (again… I wasn’t looking at the reference), but you’ll probably want to add a welt pocket.

The faux fur itself is flimsy, so I lined the jacket with lining fabric (carillo/pongee/geena)inside. Also for comfort when wearing.

 photo yurio7.jpg
Eventually, I added the sleeves and the collar, and the sport-y stripes. If you’re into details, use knit cuffs , collar and jacket trim. I had no access to them so I just used more black peach twill and white bias tape.

For finishing–added decorative buttons and a jacket zip. The buttons aren’t functional and are decorative. I’m confused by the references because on some photos he has buttons on both panels of the jacket?


 photo yurio5.jpg
Jacket done!
TIGER SHIRT:
 photo yurio9.jpg
For the shirt, I went to my local t-shirt printing service and had the shirt printed. The tiger print in the series was remastered by my brother, who is a digital artist. I had it done as a normal shirt, not a long sleeved sweater as is the reference, for ease of wear (so its not too hot… he’s wearing like 3 layers of clothes he can’t survive in tropical weather).

WIG:


 photo yurio6.jpg
The wig I chose for Yurio was one of the  blonde bob style wigs from Airily, which my friend happened to be destashing/selling from her personal stock. The Airily brand is a brand from Japan by the people behind World Cosplay and is one of the best wigs I’ve ever used.

Cut some layers from the wig to style.

MAKEUP:

For the makeup, I used Gwyshop’s Sugoi Eyes Dango Green, did subtle contouring, and focused on extending the eyes to make it look longer. That and a “manly” arched brow.

FINISHED COSPLAY:

 photo received_10154837152838351.jpeg
Cosplay done and debuted last Christmas Toycon 2016! Featured photo by Jipri.

I didn’t have the hoodie here yet, and the bag either, but I’m hoping to improve this cosplay again come YOI-con!

Hope this helps you guys put together your own Yurio cosplay! If you have questions, just comment down and I’ll try my best to answer. ^^

Review : Eyemi Blue Contact lenses

Review : Eyemi Blue Contact lenses

Happy New Year everyone! Slowly trying to get back into the hang of blogging here! 2016 has been meh and cruel to me, and I’ve been in a fairly long hiatus with the blog, even. I haven’t even finished the polymer clay tutorial series I was working on I’ve got some great things in store for everyone this year, and a lot of backlogs to post, including quick and helpful reviews like this one: my quick review of Eyemi Blue.

Looking for a pair of blue contact lenses for your cosplay that will show up on dark eyes? Eyemi has you covered! The brand is currently one of my favorites when it comes to vibrant colors that show up even on dark irises. I have black eye color naturally, and finding lenses that really show up on them is tough.

 photo emblue-1.jpg
Eyemi lenses come in a box packaging, with a really cute cat design! Mine was purchased from Megumii. Buying from them gives you a free contact lens case and kit as well, with tweezers and applicators for the contacts. ^^

 photo em-blue2.jpg
The lenses have 14.5mm diameter, with a limbal ring that isn’t too thick, and design hat isn’t too “out-there” with the focus really being on the color.

 photo 13415549_1114738751933402_3491412862508674207_o.jpg
When worn: First two photos in indoor light, taken with a point-and-shoot camera (digicam)
Last photo (with makeup) taken with the front/selfie camera of a tablet.

 photo 15967357_120300001543745030_951549405_o.jpg
In natural light, selfie taken with a tablet. The color shows up well enough even in selfies taken from arm’s length.
The lenses are also pretty comfortable, and I’m able to wear them for extended  hours. In fact I bought an entire set of the other colors just for my cosplays this entire 2017—*sweats* I’d really recommend these to cosplayers!

How’s your experience with Eyemi if you already have them? What’s your favorite contact lenses for cosplay? Let me know in the comments!

xoxo Xarin

*This post is not sponsored; lenses are purchased for my personal use with my own money.

How to Roll out Even Sheets of Worbla from Scraps

How to Roll out Even Sheets of Worbla from Scraps

Hey everyone! Today’s post will be quick and easy. This was a method I found out while I was reheating my worbla scraps the other day! I found the quick, easy solution to making even sheets was the same way I do with clay–with the pasta machine!

…Okay, the odds are pretty low that an ordinary crafter will have a pasta machine that they can just dedicate for crafts, but I do have one I use for clay. It was in the kitchen and was unused for decades. If you happen to have one you no longer use, consider using it for crafts like clay and worbla instead!

First, heat up your worbla a bit with your heat gun.
 photo IMG_4441_zpshrjghanq.jpgI let it cool to the touch and then put it through the pasta machine. Since the machine is all metal, the worbla won’t stick as long as its not too hot!
 photo IMG_4443_zps60hrxklt.jpgThis method is great because it makes the rerolled sheet completely even, and you can set a preferred thickness!

Goodluck!

Tutorial: Make Cosplay Accessories out of Polymer Clay

Tutorial: Make Cosplay Accessories out of Polymer Clay

Hi, I’m Xarin from Three Smitten Kittens, and for some of you who don’t know, I’ve been making a livelihood for about four years now, making cosplay accessories out of polymer clay. It’s such a versatile medium that you can use to make anything from your imagination, as long as you’re equipped with the proper tools and knowledge. Here’s a basic guide for making your own cosplay jewelry from clay. This guide is for flat jewelry, but you can apply the knowledge here to your other projects. 

The example we’re using today are the hair accessories for Corrin of Fire Emblem: Fates.

Before that, here are some resource materials you may need to learn about clay!

Where to Buy Clay in the Philippines

Which Polymer Clay Should I buy?

Polymer Clay Starter Kit Shopping List

STEP 1: MAKE A TEMPLATE OR PATTERN OF WHAT YOU WANT TO MAKE
 photo IMG_4235_zpshszwdpy0.jpgI have templates and patterns of almost everything I’ve ever made. I either extract the pattern from the actual reference on a software like Photoshop, or hand-draw my own pattern on paper or board, making sure to have accurate measurements. It helps make the item visibly proportioned and accurate. Having templates also gives you ease of reproduction–you can make an even, almost exact same duplicate copy, especially if you need to make something in pairs or more.
 photo IMG_4236_zpsxgldktsz.jpg
STEP 2: ROLL OUT EVEN SHEETS OF POLYMER CLAY

Making sure the sheets are perfectly even in thickness gives your accessory a professional finish. After conditioning the clay, I use a pasta machine to roll out even sheets of clay for me to use. It was an old pasta machine no one at home was using anyway, so I got permission to use it for clay. Note that once you use a pasta machine for clay, you MUST NOT use it for food again. Polymer clay, when ingested, can be toxic.Not everyone has a pasta machine or clay conditioning machine at home though, and buying some costs a lot. You can use slats instead to help guide you to getting an even thickness.

STEP 3: Cut out your clay using aid of the template.

 photo IMG_4237_zps8ehxihsp.jpgDepending on the thickness of your project, you may stack your clay on top of one another, and use a craft knife to cut your clay based on your template. I like to put the template on the clay and go over it with my acrylic roller lightly, so it “engraves” the design on the surface, and then cut based on it.

STEP 4: Assemble your accessory, bake and then add the finishing touches.
All that’s left is assembly of your item and then baking! Then you can add the finishing touches, which may be paint or varnish, and adding metal findings.
 photo corrin_etsy_main_zpsgigtrlzs.pngGoodluck and hope that helps!

Xarin

 

Page 1 of 1012345...10...Last »